Eads TGR990 - Writing in Symbol Mode; Writing in TAP Alphanumeric; Adding Words to the Dictionary

Writing text
92
Q Writing in symbol mode
1. Press # key to scroll to symbol mode.
2. Press
1 key. A series of symbols and punctuation appear on the
screen.
3. Scroll to the symbol and press
Select .
Q Writing in TAP alphanumeric
1. In the text entry screen, press the menu key and select Entry
Setup, and then change to TAP and its related language. Press
Back to return to the text entry screen.
2. In the text entry screen, press the menu key
and select Entry
Setup, and then select
Primary .
3. Press the key labelled with the desired character, once for the
first character, twice for the second, and so on. For example, to
enter “s”, press key
7 four times. To enter “7”, press the key five
times. If you do not press a key for a few seconds, the character
is accepted, and the cursor moves to the next position.
Q Adding words to the dictionary
Each language comes with its own dictionary. You can create words
(including alphanumeric abbreviations). Once you create these
words and added a space, they will be automatically stored in the
dictionary and will appear as choices whenever you press the same
key combination in the future.
MENU
MENU
TGR990_features.book Page 92 Thursday, December 3, 2009 9:43 AM