Quick guide
autotransmit feature, wait for the
Emergency Mic On
message to appear on the display and talk without pressing
PTT.
• To exit Emergency Mode, press and hold
Exit
soft key.
Making a private call
• From the Home display select Private mode using or .
Dial a number. Press and release PTT. You hear the ringing
tone. The called party answers. Wait for the called party to
finish speaking. Press and hold PTT. Wait for the talk permit
tone (if configured) and talk.
• Release PTT to listen. Press to terminate the call.
Answering a call
• The TGR990 switches to the incoming call and alerts you of
the incoming call. To answer the call, press PTT. To reject or
end the call press .
Sending a status message
• Select the desired group, then press and select
Status
→
Send Status
. Select status and press
Send
.
Sending a new message
• Press and select
Messages
→
New Message
. Write your
message. Select
Ok
. Select your message recipient or enter
number. Select
Ok
, or press PTT to send the new message.
Tips & tricks
• Backlight control
You can either disable backlight (covered operation) or have it
automatically turned on, by any key press.
• Menu shortcuts
You can easily access any menu item by pressing and a
numeric key. (No delay between and the numeric key!)
You can ask your Service Provider to program menu shortcuts.
MENU
MENU
MENU
MENU
TGR990_features.book Page 5 Thursday, December 3, 2009 9:43 AM