Eaton MVX9000 - Table 2-2: Keypad Operators

Digital Keypad Operation
MVX9000 User Manual 2-5
Overview of the
MVX9000 Drive
Table 2-2: Keypad Operators
START
This button operates as Start button for normal operation
• Motor START from the panel; active control place has to be
selected at “Panel”
ENTER
This button in the parameter edit mode is used to enter the
programming mode and enter the parameter selection.
• used for parameter edit confirmation, acceptance (confirmation)
of the edited parameter value with exit from parameter edit mode
STOP / RESET
This button has two integrated operations. The button operates as
Stop button for normal operation. In the parameter edit mode it is
used to cancel previous action and back-up one step, and in fault
mode it is used to reset the fault.
STOP
• motor STOP from the panel; active control place has to be
selected at “Panel”
RESET
• used for active fault resetting
- fault history is reset if ENTER is pressed on the “Fault History”
menu group in “Main Menu” or
- if ENTER is pressed while in the “Fault History” menu
• in programming mode press RESET key to cancel previous action
and back up one step
LEFT Arrow
• navigation button, movement to left
• in display mode, enter parameter group mode
• in parameter edit mode, exits mode, backs up one step
• cancels edited parameter (exit from a parameter edit mode)
RIGHT Arrow
• navigation button, movement to right
• enter parameter group mode
• enter parameter mode from group mode
UP and DOWN Arrows
• move either up or down the group list in order to select the
desired group menu.
• move either up or down the parameter list in order to select the
desired parameter in the group.
• increasing/decreasing of reference value on the keyboard (when
selected).
SPEED POT
• increase/decrease reference value on the keypad (when selected)