Technical Data
MVX9000 User Manual A-3
Technical Data
Table A-1: MVX9000 115V Specifications (Continued)
Table A-2: MVX9000 230V Specifications
Voltage Class 115V Series
Environment Installation Location Altitude 1,000m or lower, keep from corrosive gasses,
liquid and dust
Pollution Degree 2
Ambient Temperature -10 to 50 (Non-Condensing and not frozen)-10 to 40°C for
the models of 5.5 kW and higher
Storage Temperature -20 to 60
Ambient Humidity Below 90% RH (non-condensing)
Vibration 9.80665 m/s
2
(1G) less than 20 Hz, 5.88 m/s
2
(0.6G)
at 20 to 50 Hz
Voltage Class 230V Series
Model Number MVX_ _ _AO-2 F50 001 002 003 005 007
Max. Applicable Motor Output (kW) 0.4 0.75 1.5 2.2 3.7 5.5
Max. Applicable Motor Output (hp) 1/2 1 2 3 5 7-1/2
Output
Rating
Rated Output
Capacity (kVA)
1 1.9 2.7 3.8 6.5 9.5
Rated Output Current (A) 2.5 5 7 10 17 25
Max. Output Voltage (V) Proportional to input voltage
Rated Frequency (Hz) 0.1 to 400 Hz
Input Rating Rated Voltage 180 to 264V AC
Frequency Tolerance 50/60 Hz ± 5%
1-phase/3-phase Rated
Input Current
6.3/3.2 11.5/6.3 15.7/9 27/15 19.6 28
Control
Characteristics
Control System SPWM (Sinusoidal Pulse Width Modulation)
Output Frequency
Resolution
0.1 Hz
Overload Endurance 150% of rated current for 1 minute
Acceleration/
Deceleration Time
0.01 to 600.00 seconds
Torque Characteristics Including the auto-torque, auto-slip compensation;
starting torque can be 150% at 1 Hz in vector, 3 Hz in V/F
V/F Pattern Adjustable V/F pattern or sensorless vector
Stall Prevention Level Set to percentage of rated current
To Next Page
Loading...
