Eaton MVX9000 - Figure 5-34: Desired Freq. Attained & Preset Freq. Attained

Group 40 — Outputs
5-30 MVX9000 User Manual
Descriptions of
Parameter Settings
40.05
Desired Frequency
Attained
Range: 0.0 to 400.0 Hz Default: 0.0
Unit: 0.1Hz
If a Digital/Relay output terminal is set to function as Desired
Frequency, then the output will be activated when the
programmed frequency is attained.
Figure 5-34: Desired Freq. Attained & Preset Freq. Attained
40.06
Relay Extension
Output RO4, RO5,
RO6
Range: See Parameter 40.03 Default: 00
40.07
Relay Extension
Output RO7, RO8,
RO9
Range: See Parameter 40.03 Default: 00
Available settings are the same as 40.03 to 40.04.
These parameters select the function of the optional
extension I/O. These parameters are not visible on the
MVX9000 until the extension I/O is installed.
Desired Freq.
40.05
Detection
Range
-2 Hz
Detection
Range
±4 Hz
Detection
Range
±2 Hz
Time
Freq.
Max. Output
Freq.
ON
ON
OFF
OFF
OFF
OFF
Preset Freq.
Attained
Indication
40.03 – 40.04
or 40.06 – 40.07
Desired Freq.
Attained
Indication
40.03 – 40.04
or 40.06 – 40.07