Eaton MVX9000 - Storage; Environment; Operation; Transportation

Storage
3-2 MVX9000 User Manual
Storage and
Installation
Storage
The AC drive should be stored in the shipping carton before installation. In order
to retain the warranty coverage, the AC drive should be stored properly when it is
not to be used for an extended period of time. Some storage suggestions are:
• Store in a clean and dry location free from direct sunlight or corrosive fumes.
• Store within an ambient temperature range of -20 to +60°C.
• Store within a relative humidity range of 0 to 90% and non-condensing
environment.
• Store within an air pressure range of 86 to 106 kPA.
Environment
Operation
Air Temperature: 1/2 hp – 5 hp -10 to +50°C (14 to 122°F)
7-1/2 hp – 10 hp: -10 to +40°C (14 to 104°F)
Relative Humidity: 0% to 90%, no condensation allowed
Atmosphere Pressure: 86 to 106 kPa
Installation Site Altitude: below 1000m
Vibration: Maximum 9.80 m/s
2
(1G) at less than 20 Hz
Maximum 5.88 m/s
2
(0.6G) at 20 to 50 Hz
Storage
Temperature: -20 to +60°C (-4 to 140°F)
Relative Humidity: Less than 90%, no condensation allowed
Atmosphere Pressure: 86 to 106
Transportation
Temperature: -20 to +60°C (-4 to 140°F)
Relative Humidity: Less than 90%, no condensation allowed
Atmosphere Pressure: 86 to 106 kPa
Vibration: Maximum 9.80 m/s
2
(1G) at less than 20 Hz,
Maximum 5.88 m/s
2
(0.6G) at 20 to 50 Hz
Pollution Degree
UL Type 0, Pollution Degree 2: good for a factory type environment
Relative Humidity: Less than 90%, no condensation allowed
Atmosphere Pressure: 86 to 106