Eaton MVX9000 - Viewing and Changing Parameter Settings

Viewing and Changing Parameter Settings
5-2 MVX9000 User Manual
Descriptions of
Parameter Settings
This chapter contains the descriptions of the MVX9000 parameters. Parameters
are addressed and changed via the keypad for the MVX9000. For more
information on keypad operation, see Keypad Operation located in Chapter 2.
Viewing and Changing Parameter Settings
Parameters are grouped in a page arrangement. Each page will contain a list of
the parameters associated with that group. Move into the page groups from the
display menu by using the right arrow key.
Figure 5-1: Page Groups
Select the desired parameter group by using the up and down keys. Once the
parameter group is located, use the right arrow key to enter the group. Use the
up and down keys to scroll the parameters on that page.
Figure 5-2: Parameter Groups
Once the parameter has been located, use the right arrow key to view the
parameter setting.
Figure 5-3: Parameters
USER
AMPS
Hz
Display
20
30
40
40.01
40.02
40.03
40.04
40.05
20
30
40
H
F
STOP
RUN REVFWD
U
A
H
F
STOP
RUN REVFWD
U
A