EDAN M8 Series - IBP Transducer Zero

Patient Monitor User Manual Monitoring IBP (Optional)
- 140 -
 SCALE ADJUST: used to access the sub-menu of IBP SCALE ADJUST, in which the user
may adjust the position of the high, reference and low scales for the two waveforms
displayed on the screen.
 DEFAULT: used to access the IBP DEFAULT CONFIG dialog box, in which the user may
select whether the FACTORY DEFAULT CONFIG or the USER DEFAULT CONFIG is
to be used. After selecting any of the items and exiting the dialog box, the system will pop up
the dialog box asking for the user’s confirmation.
 EXIT: used to exit the menu and return to the main interface.
WARNING
Before setting the alarm limits, confirm to choose the correct label.
Figure 17-4 IBP ALM LIMIT SETUP
The alarm occurs when the value exceeds the set limits.
IBP Transducer Zero
Press the IBP PRESSURE ZERO button on the IBP SELECT menu to call up IBP
PRESSURE ZERO menu as shown below:
Figure 17-5 IBP PRESSURE ZERO