C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 109 –
Configure Host Key 345
Generate Generates the host key pair (public and private) 345
Show Displays RSA and DSA host keys; deletes host keys 345
Configure User Key 346
Copy Imports user public keys from TFTP server 346
Show Displays RSA and DSA user keys; deletes user keys 346
ACL Access Control Lists 348
Configure Time Range Configures the time to apply an ACL 350
Add Specifies the name of a time range 350
Show Shows the name of configured time ranges 350
Add Rule 350
Absolute Sets exact time or time range 350
Periodic Sets a recurrent time 350
Show Rule Shows the time specified by a rule 350
Configure ACL 353
Show TCAM Shows utilization parameters for TCAM 352
Add Adds an ACL based on IP or MAC address filtering 353
Show Shows the name and type of configured ACLs 353
Add Rule Configures packet filtering based on IP or MAC addresses and
other packet attributes
353
Show Rule Shows the rules specified for an ACL 353
Configure Interface Binds a port to the specified ACL and time range
Configure Binds a port to the specified ACL and time range 367
Add Mirror MIrrors matching traffic to the specified port 368
Show Mirror Shows ACLs mirrored to specified port 368
Show Hardware Counters Shows statistics for ACL hardware counters 370
ARP Inspection 371
Configure General Enables inspection globally, configures validation of additional
address components, and sets the log rate for packet inspection
372
Configure VLAN Enables ARP inspection on specified VLANs 374
Configure Interface Sets the trust mode for ports, and sets the rate
limit for packet inspection
376
Show Information
Show Statistics Displays statistics on the inspection process 377
Show Log Shows the inspection log list 378
IP Filter 379
Add Sets IP addresses of clients allowed management access via the
web, SNMP, and Telnet
379
Table 6: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General
