CONFIGURING THE SURVEILLANCE SOFTWARE
Click the IPCam Surveillance Software icon on the
desktop, quick launch bar or start menu to start the network
camera surveillance software.
The images from all connected
cameras will be displayed here.
Select a language from this drop-
down menu to change the display
language.
Changes the camera image dis-
play layout. Click the display layout
button to change the current lay-
out. There are 8 display layouts.
Click this button to switch to full
screen mode. Press the ESC key
to quit full screen mode.
Click this button to automatically
cycle through the images of all
connected cameras. Click this but-
ton once to activate the scan fea-
ture, the scan icon turns blue. Click
again to stop scanning.
Zoom out. This feature is only
available for supported cameras.
Zoom in. This feature is only avail-
able for supported cameras.
To Next Page
Loading...
