Edimax IC-3110 - Page 109

CONFIGURING THE SURVEILLANCE SOFTWARE
NETWORK CAMERA CONFIGURATION OPTIONS
ITEM
Channel
Network Mode
Edimax PnV
DESCRIPTION
Select the channel number you wish to
set.
Select Edimax PnV, DDNS Free or
Manual.
Cameras can be accessed from any-
where an Internet connection is avail-
able, but the user must first connect the
camera to the cloud with EdiView
Finder.
ITEM
Select
DESCRIPTION
Select a camera listed in the Camera
Search box, and click Select to fill in
the parameters of the selected camera
in every camera configuration field. In
the event the software cannot detect
the network camera on the LAN auto-
matically, you will have to enter the set-
tings manually.
Rescan all cameras on your local net-
work, if you didn't see the camera you
expected in the Camera Search box,
or new cameras have been added to
your local network after the last scan.
Enter the name of the camera here.
The default name is the first 6 byes of
the camera's MAC address; you can
change the name of the camera so you
can remember the camera's location or
purpose easily.
Displays the model of the selected
camera, this field can not be changed.
Enter the IP address of the camera.
Refresh
Camera ID: Enter the camera‟s MAC
address.
Password: Enter the camera‟s pass-
word.
Camera ID: Enter the camera‟s MAC
address.
Password: Enter the camera‟s pass-
word.
Model
IP*
Name*
DDNS Free
Camera Search All cameras found on your local net-
work will be displayed in the Camera
Search box.
3-65