CONFIGURING THE SURVEILLANCE SOFTWARE
NETWORK CAMERA CONFIGURATION OPTIONS
Enter the username of the camera.
Enter the web port of the camera. The
default is 80.
Enter the password of the camera.
Default value is 1234. You should
change the pre-inserted password if
you changed the password of the
selected camera.
Select the video encoding format of this
camera (MJPEG, MPEG4 or H.264).
Clear all fields in the Camera Config-
uration section.
Save settings in this tab.
Discard all changes in this tab.
* It‟s recommended to use the Select button to fill the
content of this field.
** Only available for cameras that support this feature.
Click OK to save the settings.
To Next Page
Loading...
