EasyManua.ls Logo

Edwards nEXT nEXT85 - Vent Port Adaptor; PRX Purge Restrictor; Interface Cable; Nst PC Program

Edwards nEXT nEXT85
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 46
VRX vent restrictor
Vent restrictor
Orice diameter (mm) Item number
VRX10 0.1 B58066021
VRX20 0.2 B58066022
VRX30 0.3 B58066023
VRX50 0.5 B58066024
VRX70 0.7 B58066025
13.6 Vent port adaptor
The vent port adaptor has a 1/8 inch BSP male thread that can be screwed in the vent
port and purge port which makes them applicable for NW10 ngs.
Table 47
Vent port adaptor
Vent port adaptor
Item Number
Vent port adaptor NW10 - 1/8
inch BSP male
B58066011
13.7 PRX purge restrictor
The PRX10 is a modied DN10NW centring ring that lters the purge gas and restricts its
ow rate to the recommended ow of 25 sccm. Install a vent port adaptor to the purge
port to connect a purge restrictor to the pump.
Table 48
PRX purge restrictor
Item
Item Number
PRX10 purge restrictor B58065001
13.8 Interface cable
An interface cable connects the pump to a PC. Serial commands are used to control and
monitor the pump.
Table 49
Interface cable
Item
Item Number
nEXT Interface cable B80000808
13.9 nST PC program
The nST PC program is PC-based soware that can be used with the pump through the
serial interface or through the USB service port.
You can use the nST PC program to:
control the pump
monitor the pump
congure the pump
Page 103
B8G000880_D - Accessories

Table of Contents

Related product manuals