Edwards nEXT nEXT85 - Controller Run Time; Pump Run Time; Pump Cycles

Bit number Status ag Acve ag means
8 - 31 Reserved -
7.5 Controller run me
The run hours and recommended service me of the controller on the pump can be
monitored.
Send the query that follows:
Command ? v 8 8 2 cr
The reply is as follows (where, rst number is the hours run by the controller and second
is the number of hours unl the service is recommended):
Reply = v 8 8 2 sp d d d d d d ; d d d d d d cr
Note:
The number of hours unl the next service is due is esmated by the controller based on
the operang condions of the pump and they can decrease at more or less than 1 hour
per hour. Decreased pump temperature is the primary factor in extending the controller
life.
7.6 Pump run me
The run hours and recommended service me of the rotor in the pump can be
monitored.
Send the query that follows:
Command ? v 8 8 4 cr
The reply is as follows (where, rst number is the start-stop cycles completed by the
pump and second is the number of start-stop cycles unl service is recommended):
Reply = v 8 8 4 sp d d d d d d ; d d d d d d cr
7.7 Pump cycles
The number of start-stop cycles completed and the number remaining unl the next
service is due can be monitored.
Send the query that follows:
Command ? v 8 8 4 cr
The reply is as follows (where, rst number is the start-stop cycles completed by the
pump and second is the number of start-stop cycles unl service is recommended):
Reply = v 8 8 4 sp d d d d d d ; d d d d d d cr
Page 84
B8G000880_D - Maintenance