84Installation and Service Guide: Color Controller E-85
Replacing parts
4 Connect to the printer (see page 20).
5 Power on the E-85 (see page 38).
If the E-85 does not start, see startup problems in “Table 6: E-85 error messages and conditions” on page 109.
6 Print the Test Page and the Server Configuration page (page 27).
If the Test Page does not print, verify that the printer interface cables are securely connected and on the correct ports;
verify that the printer interface board is securely connected to the motherboard; look up printing problems in
“Table 6: E-85 error messages and conditions” on page 109.
If image quality is poor, test the printer (see the service documentation that accompanies the printer).
7 Connect to the network (see page 22).
8 Ask the site administrator to download a test job over the network.
If the job does not print or has poor image quality, look up print problems in “Table 6: E-85 error messages and
conditions” on page 109 and the user documentation Troubleshooting topics.
To Next Page
Loading...
Need help?
General
