Resistance welder MULTISPOT MI-100control
Health and safety
17
Dangers to display and control panel
ontrol panel may sustain damage!
The display and control panel may sustain damage when being closed if negligent
employees leave objects lingering on the accessory box beneath.
Therefore:
Never put objects on the accessory box beneath the display and control panel.
Proceed with care when closing the flap cover with integrated display and control
panel.
2.4 Correct behaviour in accidents and dangerous situations
Preventive measures
Be prepared to confront accidents and fires.
Be sure to have first aid equipment (kits, blankets etc.) and fire extinguishers ready at hand.
All personnel must know about accident signalling systems, first aid, rescue and escape
equipment.
Keep access ways for ambulances clear and open.
Measures to be taken in case of accidents
Actuate emergency stop. ( see “2.6”.)
Initiate first aid.
Evacuate people from danger zone.
Alert persons in charge.
Alert fire brigade and ambulance service.
Keep access ways for ambulances clear and open.
2.5 Measures to be taken in case of work at the device
De-energise.
Secure against restarting (e. g. pull out mains plug).
Unstressedness determines.
Ground and short circuit.
Neighbouring energized parts cover or provide with gates.
To Next Page
Loading...
