Resistance welder MULTISPOT MI-100control
Transport, packaging, storage
22
3 Transport, packaging, storage
3.1 Safety during transport
Inexpert transport
rt may cause damage to property!
Improper transport may cause damage to property.
Therefore:
When you unload packing units and move them across your premises, proceed with
care. Consider symbols and information on packaging.
Be sure to transport equipment as described hereinafter. ( see “3.5”.)
3.2 Symbols on packaging
Fig. 7: Top
Top
The arrows point towards the ‘roof’ of the packing unit. This
side up. The arrows must always point up; otherwise the
contents of the packing unit could be damaged.
Fig. 8: Do not stack
Do not stack
Fragile goods. Do not stack; otherwise the contents of the
packing unit could be damaged.
3.3 Unpacking
1. Do not remove packaging until immediately before installation.
During unpacking, do not use pointed tools.
2. Keep the original pallet (Fig. 9) in case of any further transport needs (return of goods,
further transport).
3. Recycle packing materials.
What to do with packing materials
may cause environmental hazards!
Packing materials are valuable raw materials. In many cases, they can be recycled,
i. e. used again for packaging or in some other way or they can be further processed or
treated in some way.
Therefore:
Be sure to dispose of packing materials in sustainable manner and / or according to
local laws and regulations.
Observe local waste management legislation. In case of doubt, contact a
specialised company.
To Next Page
Loading...
