Resistance welder MULTISPOT MI-100control
Design and functionality
28
4.3.2 On the inverter control unit
Fig. 15: Power switch (in „OFF” position)
The power switch (Fig. 15) is for switching the
power supply on and off.
4.4 Connections
4.4.1 Connections on the front side
Fig. 16: Connections on the front side
1 Pressure gauge
displays input pressure.
2 Pressure reducer
continuous adjustment of input pressure
3 Central connection point for weld current,
compressed air and control voltage of the
welding pliers
4 Coolant outlet
5 Coolant return
6 Connection for sensors
7 Emergency stop pushbutton
shuts down equipment immediately.
To Next Page
Loading...
