Elektron MULTISPOT MI-100control - Moving Equipment to the Site

Resistance welder MULTISPOT MI-100control
Transport, packaging, storage
24
3.5.2 Moving equipment to the site
Fig. 10: Warning sign on balancer
When moving around, always grip equipment by the handle
provided for that purpose.
There is a danger of tilting
CAUTION!
Tipping and toppli
ng may cause damage to property!
This equipment’s centre of gravity is relatively high. In the event the wheels jam and / or
block (due to an obstacle or transverse pull, for instance), there is a danger the
equipment tips over.
Therefore:
 Move this equipment always using the handles.
 Keep potential obstacles out of the work area.
 Securely stow cables and wires.
There is a danger the equipment rolls away because the wheels must not be blocked due to the
tipping and toppling hazard.
CAUTION!
Equipment rolling aw
ay may cause damage to property!
The wheels of the equipment must not be blocked because this would cause a tipping
and toppling hazard. On the other side, though, this detail causes and increases the
danger the equipment rolls away.
Therefore:
 Be sure to operate this equipment only on a flat and even floor.
 Proceed with care when moving this equipment.