EasyManua.ls Logo

Elektron MULTISPOT MI-100control - Acceptance after shipping; Handling

Elektron MULTISPOT MI-100control
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Resistance welder MULTISPOT MI-100control
Transport, packaging, storage
23
3.4 Acceptance after shipping
Check packing units immediately after delivery. Check for integrity, missing pieces and damage.
If you detect any external shipping damage, proceed as follows:
Do not accept delivery; or accept under reserve.
Report damage on carrier's shipping papers or delivery ticket.
Initiate complaint procedure.
NOTE!
Be sure to register a complaint as soon as a defect has been detected. Claims for
damages may be brought forward only within the deadlines set for complaints.
3.5 Handling
3.5.1 Forklift truck
Fig. 9: Using a forklift truck
Packing units on pallets may be handled with a forklift truck,
as long as the following conditions are fulfilled:
The forklift truck must be certified for the weight of the
packing unit at hand.
The operator must have a licence to drive forklift trucks.
Packing units may have very high centres of gravity.
Make absolutely sure they cannot tip over.
NOTE!
Keep the original pallet in case of any further transport needs (return of goods, further
transport).

Table of Contents

Related product manuals