Resistance welder MULTISPOT MI-100control
General Information
7
1.4 Symbols
Safety information
This manual uses symbols to highlight important safety information. In addition, there is always a
signal word heading the information indicating the severity of the danger or hazard that may be
encountered.
Be sure to comply with any and all safety information. Proceed with care and circumspection.
Prevent accidents and damage to people and property.
Warnings
… indicates a situation that is imminently dangerous and will entail the death of people
and severe injuries unless it is properly avoided and prevented.
... indicates a situation that may become dangerous and may entail the death of people
and severe injuries unless it is properly avoided and prevented.
... indicates a situation that may become dangerous and may entail medium and small
injuries unless it is properly avoided and prevented.
… indicates a situation that may become critical and may entail damage to property
unless properly avoided and prevented.
Electricity constitutes a danger to life and limb.
Life hazard for persons with heart pacemakers, or other magnetically influenced
implants. Damage to equipment.
As long as the unit is in operation, risk of injury.
Risk of burns from hot surfaces.
Danger of scalding from escaping hot coolant!
To Next Page
Loading...
