Elektron MULTISPOT MI-100control - Storing All Welding Jobs

Resistance welder MULTISPOT MI-100control
Operation
62
You can simply acknowledge the next prompt by selecting
“OK”.
Fig. 83: Loading last configuration
You will see the message shown here on the left.
6.7.2.4 Storing all welding jobs
Use the menu item “Save data on compact flash” to store
data on the internal CF memory card.
The data can be later read and printed with special software
(traceability program).
Use the control knob to select “Save data on compact
flash”. Press to confirm.
Fig. 84: Storing all welding jobs
You will see the message shown here on the left.