EasyManua.ls Logo

Elektron MULTISPOT MI-100control - Supplies; Working conditions; Exposure limit values; Type plates

Elektron MULTISPOT MI-100control
90 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Resistance welder MULTISPOT MI-100control
Specifications
86
9.3 Supplies
Item Value Unit
Cooling water – tank capacity ca. 30
7.9
l
gal
Chlorine-free disinfectant accor. dosing instructions
9.4 Working conditions
Ambient conditions
Item Value Unit
Ambient temperature, max. 40 / 104
°C / °F
Rel Humidity, max.
(no dew)
85
%
9.5 Exposure limit values
Welding pliers
Item Compliance
Exposure limit values accor.
EU directive 2004/40/EG
Safe compliance with distances
15 cm perpendicular to pliers opening.
Safe compliance with distances
7 cm to welding cable.
9.6 Type plates
Fig. 106: Type plate on the backside
1
Manufacturer
2 Inverter type
3 Item no.
4 Input voltage (in VAC)
5 Frequency (in Hz)
6 Power consumption (in kVA)
7 Enclosure
8 Production no.
9 Duty cycle (in %)
10 Max. current (in A)
11 Output voltage (in VDC)
12 Appeal:
Read operating manual. Comply with operating manual!

Table of Contents

Related product manuals