Bluetooth Analyzers
Page 198 of 264 | Instant Audio
Slide bar to adjust volume up or down
Options dialog
Playing Audio
The
Instant Audio
feature allows for playing of captured audio during recording as well as playback of audio
from a saved capture. Individual audio streams from either over-the-air sources or HCI sources can be enabled
or disabled as desired.
Audio streams are represented by graphical bars, with time progressing left to right. The user can zoom or pan
using the controls in the Tool Bar, using the Zoom Bar at the bottom of the pane, or using the Navigation Bar
at the top of the pane.
The user may select various features to set playback characteristics. These include setting a range of audio for
playback, looping a selected portion of audio, and selecting an initial playback starting point.
To play captured audio during a recording:
1. During a recording, which includes decrypted audio traffic, select the Follow Live button .
Audio is played as the capture progresses.
To establish the initial playback starting point:
1. Left click anywhere in the
Instant Audio
pane or select the
Instant Audio
cursor and drag to the
desired location.
The
Instant Audio
cursor appears at the selected position:
Be sure relevant Codecs are supported on your Operating System as without
such support, playback on your computer will not properly function.
To Next Page
Loading...
Need help?
General
