ELNA eXpressive 970 - Connecting the Power Supply

13
q
w
e
r
t
Connecting the Power Supply
CAUTION:
Turn the power switch off before connecting the
machine to the power supply.
z Turn the power switch off.
q Power switch
x Insert the machine plug into the machine socket.
w Machine plug
e Machine socket
c Insert the power supply plug into the properly
grounded outlet.
r Power supply plug
t Wall outlet (grounded)
v Turn the power switch on.
q Power switch
CAUTION:
While in operation, always keep your eyes on
thevsewing area, and do not touch any moving parts
such as the thread take-up lever, handwheel or
needle.
Always turn off the power switch and unplug the
machine from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Grounding Instructions:
This machine is equipped with a grounding cable and
plug.
The plug must be plugged into an appropriate outlet that
is properly installed and grounded.
If a properly grounded outlet is not available, contact
a qualied electrician to install the properly grounded
outlet.
Refer to page II for more instructions.
z
v
c
x