1. LCD brightness adjustment
Press the function key next to the “+” or “–” sign to adjust
the screen brightness.
q Function keys (+, –)
Press the OK key to register the new setting.
w OK key
w
q
q
t
r
q
w
q
w
Customizing the Settings with the Optional RCS Unit
The machine settings and LCD screen display can be
customized with the RCS unit.
Press the SET key and the setting mode window will
open.
q SET key
There are 8 pages of display including the language
selection in the setting mode.
To display the next page, press the next page key. Press
the previous page key to go back to the previous page.
w Next page key
e Previous page key
The selected attribute is indicated with a pointer to the
left.
r Pointer
To select the desired attribute, press the upward or
downward arrow key to move the arrow up or down.
t Arrow keys
NOTE:
The value shown in the illustration is the default (preset)
value of each setting.
e
w
2. Buzzer sound control
Press the function key next to the “+” or “–” sign to adjust
loudness of the buzzer.
q Function keys (+, –)
The loudness of the buzzer can be set from 0 to 10.
To mute the buzzer, set the value to “0”.
Press the OK key to register the new setting.
w OK key
3. Inch/mm option
You can select “inch” or “millimeter” for measuring unit
displayed on the screen.
Press the function key next to the small arrow to select
“inch” or “millimeter”.
q Function keys (small arrow)
Press the OK key to register the new setting.
w OK key
To Next Page
Loading...
Need help?
General
