ELNA eXpressive 970 - LCD Screen

25
W: 00
W: 01
e
r
t
y
x The LCD screen will show [W:01].
Press the MODE button to start a new project or press
the ENTER button if you wish to continue the last
project before you turned the power off.
q ENTER button
w MODE button
c The LCD screen will show the Ready to Sew mode
display.
In the Ready to Sew mode, the LCD screen shows the
following information.
e
Hoop type
• Standard hoops
M1: MB Hoop 240 x 200 mm
M2: MB Hoop 126 x 110 mm
M3: MB Hoop 50 x 50 mm
• Optional Tajima hoops
T1: Tajima hoop 34 mm dia. (933100239A00*)
T2: Tajima hoop 54 mm dia. (933100439A00*)
T3: Tajima hoop 84 mm dia. (933100639A00*)
T4: Tajima hoop 112 mm dia. (933100839A00*)
T5: Tajima hoop 142 mm dia. (933101039A00*)
T6: Tajima hoop 78 x 168 mm. (933200239A00*)
(*Tajima part number)
• Optional special hoops
S1: Socks hoop 37 x 59 mm
S2: Socks hoop 28 x 50 mm
H1: Flat hat hoop 100 x 90 mm
• Optional monogram hoops
J1: No. 11 Monogram hoop 30 mm dia.
J1: No. 12 Monogram hoop 30 mm dia.
J2: No. 6 Monogram hoop 24 x 54 mm
J3: No. 13 Monogram hoop 64 x 28 mm
J4: No. 8 Monogram hoop 42 x 67 mm
J5: No. 3 Monogram hoop 46 x 46 mm
J6: No. 2, 9 Monogram hoop 66 x 66 mm
J7: No. 1 Monogram hoop 110 x 95 mm
J8: No. 7 Monogram hoop 120 x 121 mm
r Stitch count
* If the stitch count is 100 thousand or more, it will be
indicated in 6 digits.
t Color section
13: Total number of colors
01: Order number of the current color
y
Needle bar number
LCD screen
z When turning the power on, the LCD screen will show
[W:00].
Press the ENTER button and the hoop will move to
the home position.
q ENTER button
NOTE:
If the LCD screen shows [E:03], press the ENTER
button to initialize the needle bar position.
After initializing, the LCD screen will show [W:00].
q
w
q
z
x
c