84
CARE AND MAINTENANCE
Cleaning the Hook
CAUTION:
Turn the power switch off before cleaning the hook
area.
z Open the hook cover and remove the bobbin case
(Refer to page 16).
q Hook cover
x Clean the inside of the hook with the lint brush.
w Lint brush
w
q
Cleaning the Bobbin Case
Remove the bobbin from the bobbin case.
Clean the inside of the bobbin case with the lint brush.
z Clean the outside of the bobbin case and the opening
with lint brush.
q Lint brush
q
r
e
w
z x
z
x x Insert a corner of a piece of paper under the tension
blade and scrape out lint.
w Tension blade
e Opening
r Piece of paper
* Use only thin paper.
* Do not use anything other than paper.
To Next Page
Loading...
