87
w
q
e
r
Oiling
CAUTION:
Turn the power switch off before oiling.
If you use the machine frequently, oil the needle bars
every two weeks and oil the hook race every day.
z Clip the tip (1-2 mm from the point) of the oiler with
scissors.
w 1-2 mm from the point
x Apply a few drops of oil to the needle bar through the
holes in the front cover.
q Oiler
e Holes in the front cover
NOTE:
Use only good quality sewing machine oil.
Do not apply too much oil, otherwise threads and
fabric may be stained with excess oil.
Wipe off any excess oil with a waste cloth.
z x
c
c Open the hook cover and remove the bobbin case.
Clean the inside of the hook with the lint brush.
r Hook race
To Next Page
Loading...
Need help?
General
