eMachines E644G - ODD (Optical Disk Drive) Module Removal

3-12 Machine Maintenance Procedures
ODD (Optical Disk Drive) Module Removal 0
Prerequisite:
Battery Pack Removal
1. Remove one (1) screw (A) from lower cover. (Figure 3-7)
Figure 3-7. ODD Module in Lower Cover
2. Remove ODD module (B) from ODD bay. (Figure 3-7)
3. Remove two (2) screws (C) from ODD module. (Figure 3-8)
4. Remove ODD bracket (D) from ODD module.
5. Remove ODD bezel (E) from ODD module.
Figure 3-8. ODD Module
A
B
C
C
E
D