Emotron VSB Series User Manual

Emotron VSB Instruction Manual Chapter 1 Safety Precautions
Chapter 1 Safety Precautions
Safety Precautions
Safety signs in this manual:
WARNING
: indicates the situation in which the failure to follow operating requirements
may result in fire or serious personal injury or even death
.
ATTENTION: indicates the situation in which the failure to follow operating requirements
may cause moderate or slight injury and damage to equipment.
Users are requested to read this chapter carefully when installing, commissioning and repairing
this product and perform the operation according to safety precautions as set forth in this
chapter without fail. CG Drives & Automation will bear no responsibility for any injury and loss
as a result of any violation operation.
1.1 Safety Considerations
1.1.1 Prior to Installation
WARNING
 Do not touch control terminals, circuit boards and any other electronic parts and
components with bare hands.
 Do not use the drive whose component(s) is/are missing or damaged. Failure to comply
with may result in more faults and/or personal injury even death.
ATTENTION
 Check if the product information indicated on the nameplate is consistent with the order
requirements. If not, do not install it.
 Do not install the drive in the event that the packing list does not match with real
equipment.
- 1 -

Emotron VSB Series Specifications

General

Brand	Emotron
Model	VSB Series
Category	Controller
Language	English