Emotron VSB Series User Manual

Emotron VSB Instruction Manual Chapter 1 Safety Precautions
1.1.2 Installation
WARNING
 Only qualified personnel familiar with adjustable frequency AC drives and associated
machinery should plan or implement the installation. Failure to comply may result in
equipment damage and/or personnel injury even death.
 This equipment must be mounted on metal or other flame retardant objects. Failure to
comply may result in fire.
 This equipment must be mounted in an area which is away from combustibles and heat
sources. Failure to comply may result in fire.
 This equipment must in no case be mounted in the environment exposed to explosive gases.
Failure to comply may result in explosion.
 Never adjust mounting bolts of this equipment, especially the ones with red markers. Failure
to comply may result in equipment damage.
ATTENTION
 Handle the equipment gently and take hold of its sole plate so as to avoid foot injury or
equipment damage.
 Mount the equipment where its weight can be withstood. Failure to comply may result in
equipment damage and/or personnel injury if falling happens.
 Make sure the installation environment conforms to the requirements as stated in
Section 2.4. If not, de-rating is necessary. Failure to comply may result in equipment
damage.
 Prevent drilling residues, wire ends and screws from falling into the equipment during
installation. Failure to comply may result in faults or equipment damage.
 When mounted in a cabinet, this equipment should be provided with appropriate heat
dissipation. Failure to comply may result in faults or equipment damage.
- 2 -

Emotron VSB Series Specifications

General

Brand	Emotron
Model	VSB Series
Category	Controller
Language	English