Emotron VSB Series User Manual

Emotron VSB Instruction Manual Chapter 6 Specification of Parameters
difficult to identify motor parameters correctly, etc. When motor under V/f control is selected,
need to set related parameters group d1 well.
1: Sensor-less vector control 1
This helps achieve high-performance control without encoder and provides strong
adaptability of load. Under this selection, please correctly set motor parameters of Group d0
and vector control parameters of Group d2.
Group b Setting of R unning P arameters
Group b0 Frequency C ommand
Frequency command is set by parameter Group b0. See Fig. 6-1 for logical relation of
frequency command.
- 71 -

Emotron VSB Series Specifications

General

Brand	Emotron
Model	VSB Series
Category	Controller
Language	English