Cerabar M PMC51, PMP51, PMP55
100 Endress+Hauser
Flushing rings
A0028007
Use flushing rings if there is a risk of medium buildup or clogging at the process connection. The
flushing ring is fitted between the process connection and the process connection provided by the
customer.
Using the two lateral flushing holes, medium buildup or clogging in front of the process isolating
diaphragm can be rinsed away and the pressure chamber vented.
Various nominal widths and forms allow adaption to the respective process flange.
For other details (dimension, weight, materials), see SD01553P/00/EN "Mechanical accessories for
pressure measuring devices".
Order options
Flushing rings can be ordered as a separate accessory or as an order option for the device.
Material Nominal diameter Approval
1)
Accessory
2)
Part number
Order option
3) 4)
Cerabar
PMP55
AISI 316L
EN1092-1
DN25 - 71377379 PO
DN50 - 71377380 PP
DN80 - 71377383 PQ
ASME B16.5
NPS 1" - 71377369 PK
NPS 2" CRN 71377370 PL
NPS 3" CRN 71377371 PM
1) CSA approval: Product Configurator, order code for "Approval"
2) Inspection certification according to EN10204-3.1 material
3) Product Configurator order code for "Accessories enclosed"
4) Certificates ordered with the equipment (3.1 material certificate and NACE declaration of conformity and
PMI tests) apply to the transmitters and flushing rings listed in the table.
Endress+Hauser offers additional flushing rings as Technical Special Products (TSP).
To Next Page
Loading...
