Cerabar M PMC51, PMP51, PMP55
48 Endress+Hauser
Mechanical construction
For the dimensions, see the Product Configurator: www.endress.com
Search for product → click "Configuration" to the right of the product image → after
configuration click "CAD"
The following dimensions are rounded values. For this reason, they may deviate slightly from
the dimensions given on www.endress.com.
Device height
The device height is calculated from
• the height of the housing
• the height of optional mounted parts such as temperature isolators or capillaries
• the height of the relevant process connection.
The individual heights of the components can be found in the following sections. To calculate the
device height, simply add up the individual heights of the components. If necessary, the installation
space (the space used to install the device) must also be taken into account. You can use the
following table for this:
Section Page Height Example
Housing height → 48 ff. (A)
A0032951
A0032304
Optional mounted parts → 78 (B)
Process connections → 50
→ 64
(H)
Installation space - (I)
Installation space
F31 housing, aluminum
115 (4.53)
103 (4.06)
112 (4.41)
127 (5)
94 (3.7)
1
2
A0023569
1 Cover with viewing window
2 Cover without viewing window
Engineering unit mm (in). Front view, left-hand side view, top view
Material Weight kg (lbs) Option
1)
With display Without display
Aluminium
2)
1.1 (2.43) 1.0 (2.21) I
Aluminum with glass viewing window
2)
J
1) Product Configurator, "Housing" ordering feature
2) Degree of protection dependent on cable entry used → 43
To Next Page
Loading...
