Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 17
DD Revision 1
GSD File Information and files can be found:
• www.endress.com
• www.profibus.org
DD Files
Output values Measured values for PV (via Analog Input Function Block)
• Pressure
• Level
• Tank content
Measured values for SV
• Pressure
• Temperature
Input values Input value sent from PLC, can be shown on display
Supported functions • Identification & Maintenance
Simple device identification via control system and nameplate
• Condensed status
• Automatic ident number adaptation and switchable to following
ident numbers:
• 9700: Profile-specific transmitter identification number with the
"Classic" or "Condensed" status.
• 151C: Compatibility mode for the old Cerabar M (PMC41,
PMC45, PMP41, PMP45, PMP46, PMP48).
• 1553: Identification number for the new Cerabar M (PMC51,
PMP51 , PMP55).
• Device locking: The device can be locked by hardware or software.
Protocol-specific data
FOUNDATION Fieldbus
Device Type 0x1019
Device Revision 01 (hex)
DD Revision 0x01021
Device description files (DTM, DD) Information and files can be found:
• www.endress.com
• www.fieldcommgroup.org
CFF Revision 0x000102
ITK Version 5.2.0
ITK-Certification Driver-No. IT067700
Link-Master (LAS) capable yes
Link Master / Basic Device selectable Yes; Factory setting: Basic Device
Number of VCRs 44
Number of Link Objects in VFD 50
Number of FB-Schedule Objects 40
Virtual communication references (VCRs)
Permanent Entries 44
Client VCRs 0
Server VCRs 5
Source VCRs 8
Sink VCRs 0
Subscriber VCRs 12
Publisher VCRs 19
To Next Page
Loading...
