Endress+Hauser Cerabar M PMC51 - Configuration Data Sheet (Analog Electronics)

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 127
Configuration data sheet
(Analog electronics)
Pressure
If the option "J" was selected in the "Kalibration; Einheit" ordering feature of the Product Configurator,
the following configuration data sheet must be completed and included with the order.
Pressure Engineering Unit



mbar
bar
psi




mmH
2
O
mH
2
O
ftH
2
O
inH
2
O


mmHg
kgf/cm
2



Pa
kPa
MPa
Calibration Range / Output
Low range value (LRV):
Upper range value (URV):
__________
__________
[Pressure
engineering unit]
[Pressure
engineering unit]
Display Information
1st Value Display
1)
2st Value Display
 Main Value  none (Default)
1) Depending on sensor and comunication variant
Damping
Damping: ___________ sec (Default 2 sec)
Smallest span (factory calibration)→  13