Endress+Hauser Cerabar M PMC51 - Valve Manifold DA63 M- (Optional)

Cerabar M PMC51, PMP51, PMP55
76 Endress+Hauser
Valve manifold DA63M-
(optional)
Endress+Hauser supplies milled valve manifolds via the transmitter's product structure in the
following versions:
A B C
97 (3.82)
NPT ½
"
NPT ½
"
114 (4.49)
FNPT ½
"
FNPT ½
"
117 (4.61)
G ½
"
G ½
"
A0032414
A 2-way valve manifold FNPT x FNPT
B 2-way valve manifold MNPT x FNPT
C 2-way valve manifold G ½" + adjusting nut
Engineering unit mm (in)
2-way valve manifolds in 316L or AlloyC can be
• ordered as an enclosed accessory (seal for mounting is enclosed)
• ordered as a mounted accessory (mounted valve manifolds are supplied with a documented
leakage test).
Certificates ordered with the equipment (e.g. 3.1 material certificate and NACE) and tests (e.g. PMI
and pressure test) apply to the transmitter and the valve manifold.
For other details (order option, dimension, weight, materials), see SD01553P/00/EN "Mechanical
accessories for pressure measuring devices".
During the operating life of the valves, it may be necessary to re-tighten the packing.
Mounting on valve manifold
max. 280 (11)
A0032416
Engineering unit mm (in)
Ordering information:
Product Configurator, order code for "Accessories mounted".