Cerabar M PMC51, PMP51, PMP55
90 Endress+Hauser
PMP55: process connections
with flush-mounted process
isolating diaphragm
EN/DIN flanges, connection dimensions as per EN 1092-1/DIN 2527 and DIN 2501-1
A0021680
A0021680
D Diameter of flange
b Thickness
g Raised face
f Raised face
k Hole circle
g
2
Diameter of hole
d
M
Max. diameter of the process isolating diaphragm
Engineering unit mm
Flange
1) 2) 3)
Boltholes Diaphragm seal Option
4)
Nominal diameter Nominal pressure Shape
5)
D b g f Quantity g
2
k d
M
Weight
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg (lb)]
DN 25 10-40 B1 (D) 115 18 68 3 4 14 85 32 2.1 (4.63) CNJ
6)
DN 25 63-160 B2 (E) 140 24 68 2 4 18 100 28 2.5 (5.51) QIJ
DN 25 250 B2 (E) 150 28 68 2 4 22 105 28 3.7 (8.16) QJJ
DN 25 400 B2 (E) 180 38 68 2 4 26 130 28 7.0 (15.44) QSJ
DN 32 10-40 B1 (D) 140 18 77 2.6 4 18 100 34 1.9 (4.19) CPJ
DN 40 10-40 B1 (D) 150 18 87 2.6 4 18 110 48 2.2 (4.85) CQJ
DN 50 10-40 B1 (D) 165 20 102 3 4 18 125 59 3.0 (6.62) CXJ
6)
DN 50 63 B2 (E) 180 26 102 3 4 22 135 59 4.6 (10.14) PDJ
DN 50 100-160 B2 (E) 195 30 102 3 4 26 145 59 6.2 (13.67) QOJ
DN 50 250 B2 (E) 200 38 102 3 8 26 150 59 7.7 (16.98) QMJ
DN 50 400 B2 (E) 235 52 102 3 8 30 180 59 14.7 (32.41) QVJ
DN 80 10-40 B1 (D) 200 24 138 3.5 8 18 160 89 5.3 (11.69) CZJ
6)
DN 80 100 B2 (E) 230 32 138 4 8 24 180 89 8.9 (19.62) PPJ
DN 100 100 B2 (E) 265 36 175 5 8 30 210 89 13.7 (30.21) PQJ
1) Material: AISI 316L
2) The roughness of the surface in contact with the medium, including the raised face of the flanges (all standards) made of Alloy C276, Monel,
tantalum, rhodium>gold or PTFE is R
a
< 0.8 µm (31.5 µin). Lower surface roughness on request.
3) The flange raised face is made of the same material as the process isolating diaphragm.
4) Product Configurator, "Process connection" section
5) Description as per DIN 2527 provided in brackets
6) Alternatively available with TempC membrane. Diameter of process isolating diagram modified in TempC version: DN25: 28 mm; DN50: 61 mm.
To Next Page
Loading...
