Endress+Hauser Cerabar M PMC51 - Page 89

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 89
Universal process adapter
ø43.5 (1.71)
= ø36 (1.42)
50 (1.97)
d
M
1
A0026277
1 Silicone form seal
Engineering unit mm (in)
Designation Nominal pressure Material
1)
Weight Approval
2)
Option
3)
[kg (lb)]
Universal adapter with silicone form seal (spare part no.:
52023572) FDA 21CFR177.2600/USP Class VI
PN 10 AISI 316L (1.4435) 0.8 (1.76) EHEDG, 3A, ASME-BPE UPJ
4) 5)
1) The roughness of the surface in contact with the medium is R
a
< 0.76 µm (29.9 µin). Optionally available as an ASME-BPE-compliant version for
use in biochemical processes, surfaces in contact with medium R
a
< 0.38 µm (15 µin) electropolished, ordering information: Product Configurator,
order code for "Service", option "HK"
2) EHEDG or 3A approval only with approved process connection.
3) Product Configurator, order code for "Process connection"
4) Endress+Hauser supplies these slotted-nuts in stainless steel AISI 304 (1.4301) or in AISI 304L (1.4307).
5) Alternatively available with TempC Membrane.