Endress+Hauser Cerabar M PMC51 - Input; Measured Variable; Measuring Range

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 13
Input
Measured variable Measured process variables
• Analog electronics: Absolute pressure and gauge pressure
• HART, PROFIBUS PA, FOUNDATION Fieldbus: Absolute pressure and gauge pressure, from which
level (level, volume or mass) is derived
Measuring range PMC51 – with ceramic process isolating diaphragm (Ceraphire®) for gauge pressure
Sensor Maximum sensor measuring range Smallest calibratable
measuring span (preset at
the factory)
1)
MWP OPL Vacuum
resistance
Option
2)
lower (LRL) upper (URL)
[bar (psi)] [bar (psi)] [bar (psi)] [bar (psi)] [bar (psi)] [bar
abs
(psi
abs
)]
100 mbar (1.5 psi) –0.1 (–1.5) +0.1 (+1.5) 0.01 (0.15) 2.7 (40.5) 4 (60) 0.7 (10.5) 1C
250 mbar
(3.75 psi)
–0.25 (–3.75) +0.25 (+3.75) 0.01 (0.15) 3.3 (49.5) 5 (75) 0.5 (7.5) 1E
400 mbar (6 psi) –0.4 (–6) +0.4 (+6) 0.02 (0.3) 5.3 (79.5) 8 (120) 0 1F
1 bar (15 psi) –1 (–15) +1 (+15) 0.05 (1) 6.7 (100.5) 10 (150) 0 1H
2 bar (30 psi) –1 (–15) +2 (+30) 0.1 (1.5) 12 (180) 18 (270) 0 1K
4 bar (60 psi) –1 (–15) +4 (+60) 0.2 (3) 16.7 (250.5) 25 (375) 0 1M
10 bar (150 psi) –1 (–15) +10 (+150) 0.5 (7.5) 26.7 (400.5) 40 (600) 0 1P
40 bar (600 psi) –1 (–15) +40 (+600) 2 (30) 40 (600) 60 (900) 0 1S
1) Factory calibration turn down: Max 20:1, higher on request or configurable in the device.
2) Product Configurator, "Sensor range" ordering feature
PMC51 – with ceramic process isolating diaphragm (Ceraphire®) for absolute pressure
Sensor Maximum sensor measuring
range
Smallest calibratable
measuring span (preset
at the factory)
1)
MWP OPL Vacuum
resistance
Option
2)
lower (LRL) upper (URL)
[bar
abs
(psi
abs
)]
[bar
abs
(psi
abs
)] [bar (psi)] [bar
abs
(psi
abs
)] [bar
abs
(psi
abs
)] [bar
abs
(psi
abs
)]
100 mbar
(1.5 psi)
0 +0.1 (+1.5) 0.01 (0.15) 2.7 (40.5) 4 (60) 0 2C
250 mbar
(3.75 psi)
0 +0.25 (+3.75) 0.01 (0.15) 3.3 (49.5) 5 (75) 0 2E
400 mbar (6 psi) 0 +0.4 (+6) 0.02 (0.3) 5.3 (79.5) 8 (120) 0 2F
1 bar (15 psi) 0 +1 (+15) 0.05 (1) 6.7 (100.5) 10 (150) 0 2H
2 bar (30 psi) 0 +2 (+30) 0.1 (1.5) 12 (180) 18 (270) 0 2K
4 bar (60 psi) 0 +4 (+60) 0.2 (3) 16.7 (250.5) 25 (375) 0 2M
10 bar (150 psi) 0 +10 (+150) 0.5 (7.5) 26.7 (400.5) 40 (600) 0 2P
40 bar (600 psi) 0 +40 (+600) 2 (30) 40 (600) 60 (900) 0 2S
1) Factory calibration turn down: Max 20:1, higher on request or configurable in the device.
2) Product Configurator, "Sensor range" ordering feature