Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 99
Reduction in installation
height
If the separate housing is used, the mounting height of the process connection is reduced compared
to the dimensions of the standard version.
81 (3.19)
F31
F15
11
ø54.1 (2.13)
r ³ 120 (4.72) r ³ 120 (4.72)
1
1
2
2
29 (1.14)
44 (1.73)
17 (0.67)
36 (1.42)
A0023602
1 Process connection adapter
Engineering unit mm (in)
Weight
Component part Weight
Housing See "Housing" section
Process connection See "Process connections" section
Capillary with armoring made of AISI
316L (1.4404)
0.16 kg/m (0.35 lb/m) + 0.2 kg (0.44 lb) (weight per capillary line)
Capillary with armoring made of AISI
316L (PVC)
0.21 kg/m (0.46 lb/m) + 0.2 kg (0.44 lb) (weight per capillary line)
Capillary with armoring made of AISI
316L (PTFE)
0.29 kg/m (0.64 lb/m) + 0.2 kg (0.44 lb) (weight per capillary line)
To Next Page
Loading...
