Cerabar M PMC51, PMP51, PMP55
78 Endress+Hauser
PMP55 basic device -
examples
40 (1.57)
max. 115 (4.53)
1
6
5
3
2
2 2
4
112 (4.41)
127 (5)
95 (3.74)
114 (4.49)
A0023755
1 PMP55 basic device
2 With aluminium housing F31: 56 mm (2.2 in), with stainless steel housing F15: 66 mm (2.6 in)
3 Outer diameter of the capillary - see following table
4 Process connections with capillary tubes are 40 mm (1.57 in) higher than process connections without
capillary tubes
5 Diaphragm seal with temperature isolator
6 Diaphragm seal, here e.g. flange diaphragm seal
Engineering unit mm (in).
Outer diameter of capillary
Designation Outer diameter
Flexible armor made from 316L 8 mm (0.31 in)
Flexible armor with PVC-coating 10 mm (0.39 in)
Flexible armor with PTFE-coating 12.5 mm (0.49 in)
Diaphragm seal connection
Designation OptionProduct Configurator, "Diaphragm seal connection" ordering feature
Direct A
Temperature isolator B
..... m capillary D
..... ft capillary E
To Next Page
Loading...
