Endress+Hauser Cerabar M PMC51 - Materials Not in Contact with Process

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 101
Materials not in contact with
process
F31 housing
114 15 16
4
10
711
12
5
3
2
6
9
8
13
A0023615
Front view, left-hand side view, top view
Item number Component part Material
1 F31 housing, RAL 5012 (blue)
Die-cast aluminum with protective powder-coating on
polyester base
2 Cover, RAL 7035 (gray) Die-cast aluminum with protective powder-coating on
polyester base
3 Cover seal EPDM
4 Sight glass Mineral glass
5 Sight glass seal Silicone (VMQ)
6 External ground terminal AISI 304 (1.4301)
7 Nameplates Plastic film
8 Fastening for wired-on tag plate AISI 304 (1.4301)/AISI 316 (1.4401)
9 Pressure compensation filter AISI 316L (1.4404) and PBT-FR
10 Pressure compensation filter, O-ring VMQ or EPDM
11 Sealing ring EPDM
12 Snap ring PC Plastic
13 Seal of cable gland and blind plug EPDM/NBR
14 Cable gland Polyamide (PA), for dust ignition-proof: CuZn nickel-
plated
15 Blind plug PBT-GF30 FR
for dust ignition-proof, Ex d, FM XP and CSA XP: AISI
316L (1.4435)
16 Cover clamp Clamp AISI 316L (1.4435), screw A4