Endress+Hauser Cerabar M PMC51 - Maintenance; Exterior cleaning

Cerabar M PMC51, PMP51, PMP55
92 Endress+Hauser
PMP55: process connections
with flush-mounted process
isolating diaphragm
ASME flanges, connection dimensions as per ASME B 16.5, raised face RF
g
2
d
M
k
D
g
b
f
A0023913
D Diameter of flange
b Thickness
g Raised face
f Raised face
k Hole circle
g
2
Diameter of hole
d
M
Max. diaphragm diameter
Engineering unit in
Flange
1) 2) 3)
Boltholes Diaphragm seal Approval
4)
Option
5)
Nominal diameter Class D b g f Quantity g
2
k d
M
Weight
[in] [lb./sq.in] [in] [in] [in] [in] [in] [in] [in] [kg (lb)]
1 150 4.25 0.56 2 0.08 4 0.62 3.12 1.26 1.2 (2.65) CRN
6)
ACJ
7)
1 300 4.88 0.69 2 0.08 4 0.75 3.5 1.26 1.3 (2.87) CRN ANJ
7)
1 400/600 4.88 0.69 2 0.25 4 0.75 3.5 1.26 1.4 (3.09) CRN A0J
1 900/1500 5.88 1.12 2 0.25 4 1 4 1.26 3.2 (7.06) CRN A2J
1 2500 6.25 1.38 2 0.25 4 1 4.25 1.26 4.6 (10.14) CRN A4J
1 ½ 150 5 0.69 2.88 0.06 4 0.62 3.88 1.89 1.5 (3.31) CRN AEJ
1 ½ 300 6.12 0.81 2.88 0.06 4 0.88 4.5 1.89 2.6 (5.73) CRN AQJ
2 150 6 0.75 3.62 0.06 4 0.75 4.75 2.32 2.2 (4.85) CRN AFJ
7)
2 300 6.5 0.88 3.62 0.06 8 0.75 5 2.32 3.4 (7.5) CRN ARJ
7)
2 400/600 6.5 1 3.62 0.25 8 0.75 5 2.32 4.3 (9.48) CRN A1J
2 900/1500 8.5 1.5 3.62 0.25 8 1 6.5 2.32 10.3 (22.71) CRN A3J
2 2500 9.25 2 3.62 0.25 8 1.12 6.75 2.32 15.8 (34.84) CRN A5J
3 150 7.5 0.94 5 0.06 4 0.75 6 3.5 5.1 (11.25) CRN AGJ
7)
3 300 8.25 1.12 5 0.06 8 0.75 6 3.5 7.0 (15.44) CRN ASJ
7)
4 150 9 0.94 6.19 0.06 8 0.75 7.5 3.5 7.2 (15.88) CRN AHJ
4 300 10 1.25 6.19 0.06 8 0.88 7.88 3.5 11.7 (25.8) CRN ATJ
1) Material AISI 316/316L: Combination of AISI 316 for required pressure resistance and AISI 316L for required chemical resistance (dual rated)
2) The roughness of the surface in contact with the medium including the raised face of the flanges (all standards) made of Alloy C276, Monel,
tantalum, rhodium>gold or PTFE is R
a
< 0.8 µm (31.5 µin). Lower surface roughness on request.
3) The flange raised face is made of the same material as the process isolating diaphragm.
4) CSA approval: Product Configurator, order code for "Approval"
5) Product Configurator, order code for "Process connection"
6) CRN approval not for TempC membrane.
7) Alternatively available with TempC membrane. Diameter of process isolating diaphragm is modified in TempC version: nominal diameter 1": 1.1
in; 2": 2.40 in.