Endress+Hauser Cerabar M PMC51 - Troubleshooting; Messages

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 93
ASME flanges with barrel (extended diaphragm seal), connection dimensions as per ASME B
16.5, raised face RF
g
2
d
M
d
3
k
D
g
b
L
f
A0021683
D Diameter of flange
b Thickness
g Raised face
k Hole circle
g
2
Diameter of hole
d
M
Max. diameter of the process isolating diaphragm
d
3
Barrel (extended diaphragm seal) diameter
L Barrel (extended diaphragm seal) length
Engineering unit in
Flange
1) 2)
Boltholes Diaphragm seal Approval
3)
Option
4)
Nominal diameter Class D b g f Quantity g
2
k d
M
Weight
[in] [lb./sq.in] [in] [in] [in] [in] [in] [in] [in] [kg (lb)]
2 150 6 0.75 3.62 0.06 4 0.75 4.75 1.85
5)
CRN FMJ
5)
3 150 7.5 0.94 5 0.06 4 0.75 6 2.83
5)
CRN FNJ
5)
3 300 8.25 1.12 5 0.06 8 0.88 6.62 2.83
5)
CRN FWJ
5)
4 150 9 0.94 6.19 0.06 8 0.75 7.5 3.5
5)
CRN FOJ
5)
4 300 10 1.25 6.19 0.06 8 0.88 7.88 3.5
5)
CRN FXJ
5)
1) Material: AISI 316/316L. Combination of AISI 316 for required pressure resistance and AISI 316L for required chemical resistance (dual rated)
2) In the case of process isolating diaphragms made of Alloy C276, Monel or tantalum, the raised face of the flange and the barrel pipe are made of
316L.
3) CSA approval: Product Configurator, "Approval" ordering feature
4) Product Configurator, "Process connection" section
5) Available with 2", 4", 6" and 8" barrel (extended diaphragm seal), for barrel (extended diaphragm seal) diameter and weight see the following
table
Option
1)
Nominal
diameter
Class (L) d
3
Weight
[in] [lb./sq.in] in (mm) in (mm) [kg (lb)]
FMJ 2 150 2 (50.8) / 4 (101.6) / 6 (152.4) / 8 (203.2) 1.9 (48.3) 3.0 (6.6)/ 3.4 (7.5)/ 3.9 (8.6)/ 4.4 (9.7)
FNJ 3 150 2 (50.8) / 4 (101.6) / 6 (152.4) / 8 (203.2) 2.99 (76) 6.0 (13.2) / 6.6 (14.5) / 7.1 (15.7) / 7.8 (17.2)
FWJ 3 300 2 (50.8) / 4 (101.6) / 6 (152.4) / 8 (203.2) 2.99 (76) 7.9 (17.4) / 8.5 (18.7) / 9.0 (19.9) / 9.6 (21.2)
FOJ 4 150 2 (50.8) / 4 (101.6) / 6 (152.4) / 8 (203.2) 3.7 (94) 8.6 (19) / 9.9 (21.8) / 11.2 (24.7) / 12.4 (27.3)
FXJ 4 300 2 (50.8) / 4 (101.6) / 6 (152.4) / 8 (203.2) 3.7 (94) 13.1 (28.9)/ 14.4 (31.6)/ 15.7 (34.6)/ 16.9 (37.3)
1) Product Configurator, order code for "Process connection"