Endress+Hauser Cerabar M PMC51 - Commissioning with an operating menu

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 55
PMC51: process connections
with flush-mounted process
isolating diaphragm
EN/DIN flanges, connection dimensions as per EN 1092-1/DIN 2527
D
k
b
H
2
g
2
g
26
A0020955
D Diameter of flange
b Thickness
g Raised face
k Hole circle
g
2
Diameter of hole
Engineering unit mm.
Height H →  58
Flange Boltholes Weight Option
1)
Material Nominal diameter Nominal pressure Shape
2)
D b g Number g
2
k
mm mm mm mm mm kg (lb)
AISI 316L DN 25 PN 10-40 B1 (D) 115 18 68 4 14 85 1.4 (3.09) CNJ
AISI 316L DN 32 PN 10-40 B1 (D) 140 18 78 4 18 100 2.0 (4.41) CPJ
AISI 316L DN 40 PN 10-40 B1 (D) 150 18 88 4 18 110 2.4 (5.29) CQJ
ECTFE
3)
DN 40 PN 10-40 B2 (E) 150 21 88 4 18 110 2.6 (5.73) CQP
AISI 316L DN 50 PN 10-40 B1 (D) 165 20 102 4 18 125 3.2 (7.06) CXJ
PVDF
4)
DN 50 PN 10-16 B2 (E) 165 21.4 102 4 18 125 0.6 (1.32) CFF
ECTFE
3)
DN 50 PN 25-40 B2 (E) 165 20 102 4 18 125 3.2 (7.06) CRP
AISI 316L DN 80 PN 10-40 B1 (D) 200 24 138 8 18 160 5.4 (11.91) CZJ
ECTFE
3)
DN 80 PN 25-40 B2 (E) 200 24 138 8 18 160 5.5 (12.13) CSP
1) Product Configurator, order code for "Process connection"
2) Description as per DIN 2527 provided in brackets
3) ECTFE coating on AISI 316L (1.4404). When using in hazardous areas, avoid electrostatic charging of the plastic surfaces.
4) MWP 10 bar (150 psi), OPL max. 15 bar (225 psi); process temperature range: –10 to +60 °C (+14 to +140 °F)