Endress+Hauser Cerabar M PMC51 - Position zero adjustment

Cerabar M PMC51, PMP51, PMP55
56 Endress+Hauser
ASME flanges, connection dimensions as per ANSI B 16.5, raised face RF
D
k
b
0.08
g
2
g
1.024
H
A0020956
D Diameter of flange
b Thickness
g Raised face
k Hole circle
g
2
Diameter of hole
Engineering unit in.
Height H →  58
Flange Boltholes Weight Approval
1)
Option
2)
Material Nominal diameter Class D b g Number g
2
k
[in] [lb./sq.in] [in] [in] [in] [in] [in] [kg (lb)]
AISI 316/316L
3)
1 150 4.25 1.18 2 4 0.62 3.12 0.9 (1.98) - ACJ
4)
AISI 316/316L
3)
1 300 4.88 1.18 2 4 0.75 3.5 1.4 (3.09) - ANJ
4)
AISI 316/316L
3)
1 ½ 150 5 0.69 2.88 4 0.62 3.88 1.0 (2.21) CRN AEJ
AISI 316/316L
3)
1 ½ 300 6.12 0.81 2.88 4 0.88 4.5 2.6 (5.73) CRN AQJ
AISI 316/316L
3)
2 150 6 0.75 3.62 4 0.75 4.75 2.4 (5.29) CRN AFJ
ECTFE
5)
2 150 6 0.75 3.62 4 0.75 4.75 2.4 (5.29) - AFN
PVDF
6)
2 150 6 0.75 3.62 4 0.75 4.75 0.5 (1.1) - AFF
AISI 316/316L
3)
2 300 6.5 0.88 3.62 8 0.75 5 3.2 (7.06) CRN ARJ
AISI 316/316L
3)
3 150 7.5 0.94 5 4 0.75 6 4.9 (10.8) CRN AGJ
ECTFE
5)
3 150 7.5 0.94 5 4 0.75 6 4.9 (10.8) - AGN
PVDF
6)
3 150 7.5 0.94 5 4 0.75 6 0.9 (1.98) - AGF
AISI 316/316L
3)
3 300 8.25 1.12 5 8 0.88 6.62 6.8 (14.99) CRN ASJ
AISI 316/316L
3)
4 150 9 0.94 6.19 8 0.75 7.5 7.1 (15.66) CRN AHJ
ECTFE
5)
4 150 9 0.94 6.19 8 0.75 7.5 7.1 (15.66) - AHN
AISI 316/316L
3)
4 300 10 1.25 6.19 8 0.88 7.88 11.6 (25.58) CRN ATJ
1) CSA approval: Product Configurator, order code for "Approval"
2) Product Configurator, order code for "Process connection"
3) Combination of AISI 316 for required pressure resistance and AISI 316L for required chemical resistance (dual rated)
4) Screws must be 15 mm (0.59 in) longer than the standard flange screws.
5) ECTFE coating on AISI 316/316L. When using in hazardous areas, avoid electrostatic charging of the plastic surfaces.
6) MWP 10 bar (150 psi), OPL max. 15 bar (225 psi); process temperature range: –10 to +60 °C (+14 to +140 °F)