Endress+Hauser Cerabar M PMC51 - Accessories; Manifolds; Additional Mechanical Accessories; Welding Necks and Weld-In Adapters

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 131
Accessories
Manifolds
→  76
For details see SD01553P/00/EN "Mechanical accessories for pressure measuring devices".
Additional mechanical
accessories
Oval flange adapters, pressure gauge valves, shutoff valves, siphons, condensate pots, cable
shortening kits, adapter test, flushing rings, block&bleed valves, protective roofs.
For details see SD01553P/00/EN "Mechanical accessories for pressure measuring devices".
Welding necks and weld-in
adapters
For dimensions and technical data see Technical Information TI00426F/00.
Designation PMC51 PMP51 PMP55 Option
1)
Weld-in adapter G1/2, 316L, ―   QA
Weld-in adapter G1/2, 316L, 3.1 EN10204-3.1 material, inspection certificate ―   QB
Weld-in tool adapter G1/2, brass ―   QC
Weld-in adapter G1, 316L, conical metal joint ―  ― QE
Weld-in adapter G1, 316L, 3.1 EN10204-3.1 material, inspection certificate, conical metal joint ―  ― QF
Weld-in tool adapter G1, brass conical metal joint ―  ― QG
Weld-in adapter G1/2, 316L, for G1/2 A DIN 3852 ―  ― QM
Weld-in adapter G1/2, 316L, 3.1, for G1/2 A DIN 3852, EN10204-3.1 material, inspection certificate ―  ― QN
Weld-in adapter G1-1/2, 316L    QJ
Weld-in adapter G1-1/2, 316L, 3.1 EN10204-3.1 material, inspection certificate    QK
Weld-in tool adapter G1-1/2, brass    QL
Weld-in flange DRD DN50 65mm, 316L    QP
Weld-in fl. DRD DN50 65mm, 316L 3.1 EN10204-3.1 material, inspection certificate    QR
Weld-in tool flange DRD DN50 65mm, brass    QS
Weld-in adapter Uni D65, 316L  ― ― QT
Weld-in adapter Uni D65, 316L, 3.1 EN10204-3.1 material, inspection certificate  ― ― QU
Weld-in tool adapter Uni D65/D85, brass  ― ― Q1
Weld-in adapter Uni D85, 316L  ― ― Q2
Weld-in adapter Uni D85, 316L, 3.1 EN10204-3.1 material, inspection certificate  ― ― Q3
Adapter Uni > DIN11851 DN40, 316L, slotted-nut  ― ― RA
Adapter Uni > DIN11851 DN50, 316L, slotted-nut  ― ― RB
Adapter Uni > DRD DN50 65mm, 316L  ― ― RC
Adapter Uni > Clamp 2", 316L  ― ― RD
Adapter Uni > Clamp 3", 316L  ―  RE
Adapter Uni > Varivent N, 316L  ― ― RF
Adapter Uni > Cherry Burell 2", 316L  ― ― RH
Adapter Uni > DIN11851 DN40, 316L, 3.1, slotted-nut, EN10204-3.1 material, inspection certificate  ― ― R1
Adapter Uni > DIN11851 DN50, 316L, 3.1, slotted-nut, EN10204-3.1 material, inspection certificate  ― ― R2
Adapter Uni > DRD DN50 65mm, 316L, 3.1 EN10204-3.1 material, inspection certificate  ― ― R3
Adapter Uni > Clamp 2", 316L, 3.1 EN10204-3.1 material, inspection certificate  ― ― R4
Adapter Uni > Clamp 3", 316L, 3.1 EN10204-3.1 material, inspection certificate  ―  R5