Endress+Hauser Cerabar M PMC51 - In height level selection Calibration without reference pressure (dry calibration)

Cerabar M PMC51, PMP51, PMP55
64 Endress+Hauser
PMP51: process connections
with internal process
isolating diaphragm
ISO 228 G threaded connection
A
3 (0.12)
G ½" A
ø3.2 (0.13)
ø6 (0.24)
ø17.5 (0.69)
20 (0.79)
3 (0.12)
36 (1.42)
A0032664
B
G ½ A"
G ¼"
ø17.5 (0.69)
13 (0.51)
ø11.4 (0.45)
20 (0.79)
17 (0.67)
36 (1.42)
A0021591
C
ø11.4 (0.45)
G ½ A"
ø17.5 (0.69)
20 (0.79)
17 (0.67)
36 (1.42)
A0021592
Engineering unit mm (in)
Item Designation Material Weight kg (lb) Option
1)
A Thread ISO 228 G ½" A EN 837
AISI 316L
0.63 (1.39)
GCJ
Alloy C276 (2.4819) GCC
B
Thread ISO 228 G ½" A,
G ¼" (female)
AISI 316L GLJ
Alloy C276 (2.4819) GLC
C
Thread ISO 228 G ½" A,
Bore 11.4 mm (0.45 in)
AISI 316L GMJ
Alloy C276 (2.4819) GMC
1) Product Configurator, "Process connection" ordering feature
DIN 13 threaded connection
A
ø11.4 (0.45)
M20x1.5
ø17.5 (0.69)
20 (0.79)
17 (0.67)
36 (1.42)
A0021609
B
3 (0.12)
M20x1.5
ø3.2 (0.13)
ø6 (0.24)
ø17.5 (0.69)
20 (0.79)
3 (0.12)
36 (1.42)
A0021588
Engineering unit mm (in)
Item Designation Material Weight kg (lb) Option
1)
A
DIN 13 M20 x 1,5
Bore 11.4 mm (0.45 in)
AISI 316L
0.6 (1.32)
G1J
Alloy C276 (2.4819) G2J
B
DIN 13 M20 x 1,5, EN 837,
Bore 3 mm (0.12 in)
AISI 316L G5J
Alloy C276 (2.4819) G6J
1) Product Configurator, "Process connection" ordering feature